Home
Kipp Standard Parts
Back to Indexing Plungers
K2215 - Bowden Cable Remote Operation Indexing Plunger In Stainless Steel With Entended Pin

K2215 - Bowden Cable Remote Operation Indexing Plunger In Stainless Steel With Entended Pin

Product description:
Indexing plungers are used where any change in locking position due to lateral forces should be prevented.
Some examples of this are for length, height and position indexing in machine, furniture and special vehicle construction.

Indexing plungers with remote actuation are used where inaccessible assembly spaces are making it difficult to operate, or where remote actuation is required for ergonomic or safety reasons.

The indexing plunger is connected to the operator side by a Bowden cable. The combination of indexing plunger and actuating element forms a complete system which can be used for many types of application. The actuator with detent function should be used. for applications where the indexing pin should remain disengaged for an extended period and be prevented from springing back.

Material:
Threaded sleeve 1.4305.
Indexing pin 1.4034.
Wire cable 1.4401.
Traction sleeve steel wire with plastic sleeving inside and outside.
End sleeves and setscrews brass.

Version:
Threaded sleeve bright.
Indexing pin hardened and ground, bright.
End sleeve and setscrew galvanised.
Bowden cable casing black.

Note:
Various lengths of Bowden cable are available.
The Bowden cable can be shortened as required during installation to ensure an exact fit in the application concerned.
The wire cable or Bowden cable sheath can be easily replaced if required.

Note the following points when installing Bowden cables:
The length of the free end of the cable can change due to layout angle, bend radius and load factors. Therefore, the length of the opposing bracket (cable sheath) must be adjusted using the enclosed set screw after the Bowden cable has been laid. The set screw is also used to set the tension in the Bowden cable system.
During installation, take particular care to ensure that the bend radius is not less than the minimum value, which in this case is R = 65 mm. A radius which is too small can lead to increased wear and higher friction.
Briefly bending less than the min. bending radius during installation should also be avoided, as this can damage the cable sheath. The sheath is also only designed to absorb compressive forces. If it is pulled too hard, the internal spiral will stretch and be permanently damaged.

On request:
Special versions.

Accessory:
Actuating elements K2213.
Hex nuts K0700.
Mounting brackets K0638.
Spacer rings K0665.
Positioning bushes K1290.
Bowden cables K2116.
Wire cables K2023.
Traction sleeves K2024.
End sleeves K2025.
Setscrews K2026.
Bowden cable distributor K2042.

Supplied with:
Indexing plungers with pre-fitted wire cable.
Traction sleeve, end sleeve and setscrew included.

Drawing reference:
Form A: with hexagon
Form G: full thread
Form L: smooth

Select your sizes

Line drawing placeholder

Move drawing here

	D	D1	D2	D3	Form	Form definition	Fx30°	L	L1	L2	L3	Spring force final pressure F2 approx. N	Spring force initial pressure F1 approx. N	SW	Travel S	Price (Exc. Tax)	Stock
Filters
K2215.0210104X1000 View product	4	M10x1	1	5	G	Full Thread	1	1000	49	10	--	22	6	9	6	£37.48	0
K2215.0210104X3000 View product	4	M10x1	1	5	G	Full Thread	1	3000	49	10	--	22	6	9	6	£42.82	0
K2215.0210104X5000 View product	4	M10x1	1	5	G	Full Thread	1	5000	49	10	--	22	6	9	6	£47.64	0
K2215.0212005X1000 View product	5	M12	1	5	G	Full Thread	1.3	1000	53	10	--	23	5	10	8	£39.50	0
K2215.0212005X3000 View product	5	M12	1	5	G	Full Thread	1.3	3000	53	10	--	23	5	10	8	£44.82	0
K2215.0212005X5000 View product	5	M12	1	5	G	Full Thread	1.3	5000	53	10	--	23	5	10	8	£49.70	0
K2215.0212105X1000 View product	5	M12x1.5	1	5	G	Full Thread	1.3	1000	53	10	--	23	5	10	8	£39.50	0
K2215.0212105X3000 View product	5	M12x1.5	1	5	G	Full Thread	1.3	3000	53	10	--	23	5	10	8	£44.82	0
K2215.0212105X5000 View product	5	M12x1.5	1	5	G	Full Thread	1.3	5000	53	10	--	23	5	10	8	£49.70	0
K2215.0216006X1000 View product	6	M16	1.5	5	G	Full Thread	1.8	1000	61	10	--	15	6	14	9	£38.46	0
K2215.0216006X3000 View product	6	M16	1.5	5	G	Full Thread	1.8	3000	61	10	--	15	6	14	9	£42.14	0
K2215.0216006X5000 View product	6	M16	1.5	5	G	Full Thread	1.8	5000	61	10	--	15	6	14	9	£47.36	0
K2215.0216106X1000 View product	6	M16x1.5	1.5	5	G	Full Thread	1.8	1000	61	10	--	15	6	14	9	£38.46	0
K2215.0216106X3000 View product	6	M16x1.5	1.5	5	G	Full Thread	1.8	3000	61	10	--	15	6	14	9	£42.14	0
K2215.0216106X5000 View product	6	M16x1.5	1.5	5	G	Full Thread	1.8	5000	61	10	--	15	6	14	9	£47.36	0
K2215.0220008X1000 View product	8	M20	1.5	5	G	Full Thread	2.3	1000	68	10	--	41	15	17	12	£43.44	0
K2215.0220008X3000 View product	8	M20	1.5	5	G	Full Thread	2.3	3000	68	10	--	41	15	17	12	£47.16	0
K2215.0220008X5000 View product	8	M20	1.5	5	G	Full Thread	2.3	5000	68	10	--	41	15	17	12	£52.38	0
K2215.0220108X1000 View product	8	M20x1.5	1.5	5	G	Full Thread	2.3	1000	68	10	--	41	15	17	12	£43.44	0
K2215.0220108X3000 View product	8	M20x1.5	1.5	5	G	Full Thread	2.3	3000	68	10	--	41	15	17	12	£47.16	0
K2215.0220108X5000 View product	8	M20x1.5	1.5	5	G	Full Thread	2.3	5000	68	10	--	41	15	17	12	£52.38	0
K2215.0224010X1000 View product	10	M24	1.5	5	G	Full Thread	2.8	1000	76	10	--	38	14	22	15	£48.58	0
K2215.0224010X3000 View product	10	M24	1.5	5	G	Full Thread	2.8	3000	76	10	--	38	14	22	15	£52.30	0
K2215.0224010X5000 View product	10	M24	1.5	5	G	Full Thread	2.8	5000	76	10	--	38	14	22	15	£57.50	0
K2215.0224110X1000 View product	10	M24x2	1.5	5	G	Full Thread	2.8	1000	76	10	--	38	14	22	15	£48.58	0
K2215.0224110X3000 View product	10	M24x2	1.5	5	G	Full Thread	2.8	3000	76	10	--	38	14	22	15	£52.30	0
K2215.0224110X5000 View product	10	M24x2	1.5	5	G	Full Thread	2.8	5000	76	10	--	38	14	22	15	£57.50	0
K2215.0110005X1000 View product	5	M10	1	5	A	With Hexagon	1.3	1000	17	36	15	23	5	13	8	£39.96	0
K2215.0110005X3000 View product	5	M10	1	5	A	With Hexagon	1.3	3000	17	36	15	23	5	13	8	£45.24	0
K2215.0110005X5000 View product	5	M10	1	5	A	With Hexagon	1.3	5000	17	36	15	23	5	13	8	£50.10	0
K2215.0110105X1000 View product	5	M10x1	1	5	A	With Hexagon	1.3	1000	17	36	15	23	5	13	8	£39.96	0
K2215.0110105X3000 View product	5	M10x1	1	5	A	With Hexagon	1.3	3000	17	36	15	23	5	13	8	£45.24	0
K2215.0110105X5000 View product	5	M10x1	1	5	A	With Hexagon	1.3	5000	17	36	15	23	5	13	8	£50.10	0
K2215.0112006X1000 View product	6	M12	1.5	5	A	With Hexagon	1.8	1000	20	41	17	15	6	14	9	£37.86	0
K2215.0112006X3000 View product	6	M12	1.5	5	A	With Hexagon	1.8	3000	20	41	17	15	6	14	9	£41.56	0
K2215.0112006X5000 View product	6	M12	1.5	5	A	With Hexagon	1.8	5000	20	41	17	15	6	14	9	£46.78	0
K2215.0112106X1000 View product	6	M12x1.5	1.5	5	A	With Hexagon	1.8	1000	20	41	17	15	6	14	9	£37.86	0
K2215.0112106X3000 View product	6	M12x1.5	1.5	5	A	With Hexagon	1.8	3000	20	41	17	15	6	14	9	£41.56	0
K2215.0112106X5000 View product	6	M12x1.5	1.5	5	A	With Hexagon	1.8	5000	20	41	17	15	6	14	9	£46.78	0
K2215.0116008X1000 View product	8	M16	1.5	5	A	With Hexagon	2.3	1000	26	42	23	41	15	19	12	£41.02	0
K2215.0116008X3000 View product	8	M16	1.5	5	A	With Hexagon	2.3	3000	26	42	23	41	15	19	12	£44.76	0
K2215.0116008X5000 View product	8	M16	1.5	5	A	With Hexagon	2.3	5000	26	42	23	41	15	19	12	£49.96	0
K2215.0116108X1000 View product	8	M16x1.5	1.5	5	A	With Hexagon	2.3	1000	26	42	23	41	15	19	12	£41.02	0
K2215.0116108X3000 View product	8	M16x1.5	1.5	5	A	With Hexagon	2.3	3000	26	42	23	41	15	19	12	£44.76	0
K2215.0116108X5000 View product	8	M16x1.5	1.5	5	A	With Hexagon	2.3	5000	26	42	23	41	15	19	12	£49.96	0
K2215.0120010X1000 View product	10	M20	1.5	5	A	With Hexagon	2.8	1000	28	48	25	38	14	24	15	£48.52	0
K2215.0120010X3000 View product	10	M20	1.5	5	A	With Hexagon	2.8	3000	28	48	25	38	14	24	15	£52.26	0
K2215.0120010X5000 View product	10	M20	1.5	5	A	With Hexagon	2.8	5000	28	48	25	38	14	24	15	£57.48	0

Showing products per page

List view Grid view

{
    "id": "1904",
    "layout_id": "",
    "parent_id": "393",
    "name": "K2215 - Bowden Cable Remote Operation Indexing Plunger In Stainless Steel With Entended Pin",
    "slug": "k2215-bowden-cable-remote-operation-indexing-plunger-in-stainless-steel-with-entended-pin",
    "meta_title": "K2215 - Bowden Cable Remote Operation Indexing Plunger In Stainless Steel With Entended Pin",
    "meta_description": "",
    "canonical_override": "",
    "long_description": "",
    "short_description": "<div class=\"characteristic-pills-wrapper\">{{ snippet(Bowden Cable) }}<\/div>\r\n\r\n<div id=\"category-description-short-1\">\r\n<div style=\"text-align: left;\"><strong>Product description: <\/strong><br \/>\r\nIndexing plungers are used where any change in locking position due to lateral forces should be prevented.<br \/>\r\nSome examples of this are for length, height and position indexing in machine, furniture and special vehicle construction.<br \/>\r\n<br \/>\r\nIndexing plungers with remote actuation are used where inaccessible assembly spaces are making it difficult to operate, or where remote actuation is required for ergonomic or safety reasons.<br \/>\r\n<br \/>\r\nThe indexing plunger is connected to the operator side by a Bowden cable. The combination of indexing plunger and actuating element forms a complete system which can be used for many types of application. The actuator with detent function should be used. for applications where the indexing pin should remain disengaged for an extended period and be prevented from springing back.<br \/>\r\n<br \/>\r\n<strong>Material: <\/strong><br \/>\r\nThreaded sleeve 1.4305.<br \/>\r\nIndexing pin 1.4034.<br \/>\r\nWire cable 1.4401.<br \/>\r\nTraction sleeve steel wire with plastic sleeving inside and outside.<br \/>\r\nEnd sleeves and setscrews brass.<br \/>\r\n<br \/>\r\n<strong>Version: <\/strong><br \/>\r\nThreaded sleeve bright.<br \/>\r\nIndexing pin hardened and ground, bright.<br \/>\r\nEnd sleeve and setscrew galvanised.<br \/>\r\nBowden cable casing black.<br \/>\r\n<br \/>\r\n<strong>Note: <\/strong><br \/>\r\nVarious lengths of Bowden cable are available.<br \/>\r\nThe Bowden cable can be shortened as required during installation to ensure an exact fit in the application concerned.<br \/>\r\nThe wire cable or Bowden cable sheath can be easily replaced if required.<br \/>\r\n<br \/>\r\n<strong>Note the following points when installing Bowden cables: <\/strong><br \/>\r\nThe length of the free end of the cable can change due to layout angle, bend radius and load factors. Therefore, the length of the opposing bracket (cable sheath) must be adjusted using the enclosed set screw after the Bowden cable has been laid. The set screw is also used to set the tension in the Bowden cable system.<br \/>\r\nDuring installation, take particular care to ensure that the bend radius is not less than the minimum value, which in this case is R = 65 mm. A radius which is too small can lead to increased wear and higher friction.<br \/>\r\nBriefly bending less than the min. bending radius during installation should also be avoided, as this can damage the cable sheath. The sheath is also only designed to absorb compressive forces. If it is pulled too hard, the internal spiral will stretch and be permanently damaged.<br \/>\r\n<br \/>\r\n<strong>On request: <\/strong><br \/>\r\nSpecial versions.<br \/>\r\n<br \/>\r\n<strong>Accessory: <\/strong><br \/>\r\nActuating elements K2213.<br \/>\r\nHex nuts K0700.<br \/>\r\nMounting brackets K0638.<br \/>\r\nSpacer rings K0665.<br \/>\r\nPositioning bushes K1290.<br \/>\r\nBowden cables K2116.<br \/>\r\nWire cables K2023.<br \/>\r\nTraction sleeves K2024.<br \/>\r\nEnd sleeves K2025.<br \/>\r\nSetscrews K2026.<br \/>\r\nBowden cable distributor K2042.<br \/>\r\n<br \/>\r\n<strong>Supplied with: <\/strong><br \/>\r\nIndexing plungers with pre-fitted wire cable.<br \/>\r\nTraction sleeve, end sleeve and setscrew included.<br \/>\r\n<br \/>\r\n<strong>Drawing reference: <\/strong><br \/>\r\nForm A: with hexagon<br \/>\r\nForm G: full thread<br \/>\r\nForm L: smooth<\/div>\r\n\r\n<div class=\"category-desc-drawings\" style=\"display: flex; justify-content: center; flex-wrap: wrap; gap: 20px; margin-top: 20px;\"><img src=\"https:\/\/images.shopcdn.co.uk\/5a\/dc\/5adc942dcb2f2032bc350169b0e232c2\/1024x1024\/webp\/fit?quality=100&amp;compression=100&amp;t=1792056911\" style=\"width: 100%;\" \/><\/div>\r\n<\/div>",
    "active": "1",
    "visible": "1",
    "show_products": "1",
    "order_num": "573",
    "default_sortby": "aa",
    "deleted": "0",
    "created": "2026-10-15 09:25:30",
    "updated": "2026-10-15 09:35:35",
    "images": [
        {
            "url": "https:\/\/images.shopcdn.co.uk\/9c\/e1\/9ce143b1d8aac10c125b4778b90ca61b\/1024x1024\/webp\/fit?quality=100&amp;compression=100",
            "contain_url": "https:\/\/images.shopcdn.co.uk\/9c\/e1\/9ce143b1d8aac10c125b4778b90ca61b\/256x256\/webp\/fit?quality=100&amp;compression=100",
            "crop_url": "https:\/\/images.shopcdn.co.uk\/9c\/e1\/9ce143b1d8aac10c125b4778b90ca61b\/256x256\/webp\/fit?quality=100&amp;compression=100",
            "original_url": "https:\/\/images.shopcdn.co.uk\/9c\/e1\/9ce143b1d8aac10c125b4778b90ca61b\/750x569\/webp\/resize?quality=100&amp;compression=100"
        }
    ],
    "is_parent_category": false,
    "is_product_group": false,
    "parent_category_title": "Indexing Plungers",
    "parent_category_url": "indexing-plungers",
    "path": "Kipp Standard Parts > Indexing Plungers > K2215 - Bowden Cable Remote Operation Indexing Plunger In Stainless Steel With Entended Pin",
    "path_list": [
        "Kipp Standard Parts",
        "Indexing Plungers",
        "K2215 - Bowden Cable Remote Operation Indexing Plunger In Stainless Steel With Entended Pin"
    ],
    "selectedTags": [],
    "availableProducts": {
        "key": "available",
        "doc_count": 72,
        "stockLevel": {
            "untracked": 72,
            "in_stock": 0
        }
    },
    "unavailableProducts": {
        "key": "unavailable",
        "doc_count": 0
    },
    "product_attributes": [
        "D",
        "D1",
        "D2",
        "D3",
        "Form",
        "Form definition",
        "Fx30\u00b0",
        "L",
        "L1",
        "L2",
        "L3",
        "Spring force final pressure F2 approx. N",
        "Spring force initial pressure F1 approx. N",
        "SW",
        "Travel S"
    ]
}

Category Image Schema

K2215 - Bowden Cable Remote Operation Indexing Plunger In Stainless Steel With Entended Pin

£37.48

£42.82

£47.64

£39.50

£44.82

£49.70

£39.50

£44.82

£49.70

£38.46

£42.14

£47.36

£38.46

£42.14

£47.36

£43.44

£47.16

£52.38

£43.44

£47.16

£52.38

£48.58

£52.30

£57.50

£48.58

£52.30

£57.50

£39.96

£45.24

£50.10

£39.96

£45.24

£50.10

£37.86

£41.56

£46.78

£37.86

£41.56

£46.78

£41.02

£44.76

£49.96

£41.02

£44.76

£49.96

£48.52

£52.26

£57.48

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M10x1 Thread. 1000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M10x1 Thread. 3000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M10x1 Thread. 5000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M12 Thread. 1000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M12 Thread. 3000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M12 Thread. 5000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M12x1,5 Thread. 1000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M12x1,5 Thread. 3000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M12x1,5 Thread. 5000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M16 Thread. 1000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M16 Thread. 3000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M16 Thread. 5000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M16x1,5 Thread. 1000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M16x1,5 Thread. 3000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M16x1,5 Thread. 5000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M20 Thread. 1000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M20 Thread. 3000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M20 Thread. 5000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M20x1,5 Thread. 1000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M20x1,5 Thread. 3000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M20x1,5 Thread. 5000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M24 Thread. 1000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M24 Thread. 3000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M24 Thread. 5000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M24x2 Thread. 1000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M24x2 Thread. 3000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Full Thread. M24x2 Thread. 5000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Hex Style. M10 Thread. 1000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Hex Style. M10 Thread. 3000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Hex Style. M10 Thread. 5000mm Long Cable.

Indexing Plunger In Stainless Steel. Bowden Cable Remote Operation. Extended Pin. Hex Style. M10x1 Thread. 1000mm Long Cable.