1. Home
2. Kipp Standard Parts
3. Back to Indexing Plungers
4. K0747 - Indexing Plungers

Line drawing placeholder

{
    "id": "459",
    "parent_id": "393",
    "name": "K0747 - Indexing Plungers",
    "slug": "k0747-indexing-plungers",
    "meta_title": "K0747 - Indexing Plungers",
    "meta_description": "",
    "canonical_override": "",
    "long_description": "",
    "short_description": "<div id=\"category-description-short-1\">\r\n<div style=\"text-align: left;\">\r\n<p><strong>Product description:<\/strong><br \/>\r\nIndexing plungers are used where any change in locking position due to lateral forces should be prevented. A new indexed position can be only be moved to after the pin has been manually retracted.<br \/>\r\nLockout versions&nbsp;are recommended for applications where the indexing pin should remain disengaged for an extended period and be prevented from springing back.<br \/>\r\n<br \/>\r\nIndexing plungers with regular threads and not ground or hardened indexing pins are a cost-effective alternative to existing indexing plungers. However, the precision offered is still sufficient for many applications. The smaller machining tolerances also make these products less sensitive to the alignment errors that can occur when aligning indexing plungers with the hole in the opposite component.<\/p>\r\n\r\n<p><strong>Material:<\/strong><br \/>\r\nSteel version:<br \/>\r\nThreaded sleeve 1.0715.<br \/>\r\nIndexing pin 1.4305.<br \/>\r\n<br \/>\r\nStainless steel version:<br \/>\r\nThreaded sleeve and indexing pin 1.4305.<br \/>\r\n<br \/>\r\nMushroom knob black grey thermoplastic RAL 7021.<\/p>\r\n\r\n<p><strong>Version:<\/strong><br \/>\r\nSteel version:<br \/>\r\nIndexing pin hardened.<br \/>\r\nThreaded sleeve trivalent blue passivated.<br \/>\r\nIndexing pin bright.<br \/>\r\n<br \/>\r\nStainless steel version:<br \/>\r\nIndexing pin not hardened.<br \/>\r\nSteel parts bright.Note:Pay attention to the max. tightening torque when assembling.On request:Special versions.<\/p>\r\n<\/div>\r\n\r\n<div class=\"category-desc-drawings\" style=\"display: flex; justify-content: center; flex-wrap: wrap; gap: 20px; margin-top: 20px;\"><img alt=\"Indexing Plunger. Thread Size M6. Pin Diameter 4mm. Without Locking Slot. Not Hardened. Steel..\" src=\"https:\/\/images.shopcdn.co.uk\/24\/c5\/24c5cc95c73b658305ac97d8fb403959\/1024x1024\/webp\/fit?quality=100&compression=100&t=1749556668\" \/><\/div>\r\n<\/div>",
    "active": "1",
    "visible": "1",
    "show_products": "1",
    "order_num": "555",
    "default_sortby": "best_match",
    "deleted": "0",
    "path": "Kipp Standard Parts > Indexing Plungers > K0747 - Indexing Plungers",
    "children": [],
    "parent": {
        "id": "393",
        "parent_id": "105",
        "name": "Indexing Plungers",
        "slug": "indexing-plungers",
        "meta_title": "Indexing Plungers",
        "meta_description": "",
        "canonical_override": "",
        "long_description": "&lt;p data-end=&quot;424&quot; data-start=&quot;165&quot;&gt;&lt;strong&gt;Indexing plungers are precision-engineered components used to accurately lock, locate, and position moving parts in machinery and equipment. They allow for quick and easy adjustments while ensuring components remain securely fixed in place during operation.&lt;\/strong&gt;&lt;\/p&gt;\r\n\r\n&lt;p data-end=&quot;752&quot; data-start=&quot;426&quot;&gt;&lt;strong&gt;Commonly used in mechanical engineering, automation systems, jigs, fixtures, and assembly setups, indexing plungers consist of a spring-loaded pin that can be retracted and re-engaged as needed. This design enables repeatable positioning and reliable holding, improving both safety and efficiency in industrial applications.&lt;\/strong&gt;&lt;\/p&gt;\r\n\r\n&lt;p data-end=&quot;998&quot; data-start=&quot;754&quot;&gt;&lt;strong&gt;Available in various styles &amp;mdash; including lock-out types, pull knob, and threaded versions &amp;mdash; indexing plungers come in materials such as steel or stainless steel for strength and corrosion resistance, with plastic or metal knobs for user comfort.&lt;\/strong&gt;&lt;\/p&gt;",
        "short_description": "",
        "active": "1",
        "visible": "1",
        "show_products": "1",
        "order_num": "502",
        "default_sortby": "best_match",
        "deleted": "0",
        "path": "Kipp Standard Parts &gt; Indexing Plungers"
    },
    "siblings": [
        {
            "id": "394",
            "parent_id": "393",
            "name": "K0338 - Indexing Plungers In Steel &amp; Stainless Steel Size M6-M24",
            "slug": "k0338-indexing-plungers-in-steel-stainless-steel-size-m6-m24",
            "meta_title": "K0338 - Indexing Plungers In Steel &amp; Stainless Steel Size M6-M24",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "503",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0338 - Indexing Plungers In Steel &amp; Stainless Steel Size M6-M24",
            "image_url": "https:\/\/images.shopcdn.co.uk\/93\/bc\/93bc08c795fc408c46d64f2615e57642\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": [
                "k0338-indexing-plungers-with-red-grip-in-steel-and-stainless-steel",
                "k0338-indexing-plungers-in-stainless-steel",
                "k0338-indexing-plungers-in-steel-hardened-pin",
                "k0338-indexing-plungers-in-stainless-steel-hardened-pin",
                "k0338-indexing-plungers-with-red-grip-form-d-in-steel",
                "k0338-indexing-plungers-with-red-grip-form-b-in-steel-kl9cfl",
                "k0338-indexing-plungers-with-red-grip-form-b-in-stainless-steel",
                "k0338-indexing-plungers-with-red-grip-form-d-in-stainless-steel"
            ]
        },
        {
            "id": "397",
            "parent_id": "393",
            "name": "K0339 - Indexing Plungers In Steel &amp; Stainless Steel Size M10-M20",
            "slug": "k0339-indexing-plungers-in-steel-stainless-steel-size-m10-m20",
            "meta_title": "K0339 - Indexing Plungers In Steel &amp; Stainless Steel Size M10-M20",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "512",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0339 - Indexing Plungers In Steel &amp; Stainless Steel Size M10-M20",
            "image_url": "https:\/\/images.shopcdn.co.uk\/65\/41\/65419320e43331f674b331bda8c7e2cb\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": [
                "k0339-indexing-plungers-in-steel-hardened-pin",
                "k0339-indexing-plungers-in-stainless-steel-hardened-pin",
                "k0339-indexing-plungers-in-stainless-steel-pin-not-hardened"
            ]
        },
        {
            "id": "398",
            "parent_id": "393",
            "name": "K0343 - Indexing Plungers Without Collar In Steel And Stainless Steel",
            "slug": "k0343-indexing-plungers-without-collar-in-steel-and-stainless-steel",
            "meta_title": "K0343 - Indexing Plungers Without Collar In Steel And Stainless Steel",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "543",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0343 - Indexing Plungers Without Collar In Steel And Stainless Steel",
            "image_url": "https:\/\/images.shopcdn.co.uk\/fe\/a1\/fea1c139840bccc2baa5db5c979eddb2\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": [
                "k0343-indexing-plunger-without-collar-in-stainless-steel",
                "k0343-indexing-plunger-without-collar-in-stainless-steel-hardened-pin",
                "k0343-indexing-plungers-without-collar-in-steel-pin-hardened"
            ]
        },
        {
            "id": "409",
            "parent_id": "393",
            "name": "K0340 - Indexing Plungers Side Handle In Steel Size M6-M16",
            "slug": "k0340-indexing-plungers-side-handle-in-steel-size-m6-m16",
            "meta_title": "K0340 - Indexing Plungers Side Handle In Steel Size M6-M16",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "&lt;div id=&quot;category-description-short-1&quot;&gt;\r\n&lt;p style=&quot;text-align: left;&quot;&gt;&lt;strong&gt;Material:&lt;\/strong&gt;&lt;br \/&gt;\r\nSteel grade 5.8.&lt;\/p&gt;\r\n\r\n&lt;p style=&quot;text-align: left;&quot;&gt;&lt;strong&gt;Version:&lt;\/strong&gt;&lt;br \/&gt;\r\nTrivalent blue passivated.&lt;\/p&gt;\r\n\r\n&lt;div style=&quot;text-align: left;&quot;&gt;&lt;strong&gt;Note:&lt;\/strong&gt;&lt;br \/&gt;\r\nIndexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged.&lt;\/div&gt;\r\n\r\n&lt;div class=&quot;category-desc-drawings&quot; style=&quot;display: flex; justify-content: center; flex-wrap: wrap; gap: 20px; margin-top: 20px;&quot;&gt;&lt;img alt=&quot;Indexing Plunger. M6 Thread. With Locking Slot. Steel.&quot; src=&quot;https:\/\/images.shopcdn.co.uk\/b0\/f5\/b0f550bb1aa511c4a76d75d81a036348\/750x526\/webp\/resize?quality=100&amp;compression=100&quot; \/&gt;&lt;\/div&gt;\r\n&lt;\/div&gt;",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "523",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0340 - Indexing Plungers Side Handle In Steel Size M6-M16",
            "image_url": "https:\/\/images.shopcdn.co.uk\/25\/17\/251765dd52f20f72f50c06e70d08681c\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": []
        },
        {
            "id": "415",
            "parent_id": "393",
            "name": "K0342 - Indexing Plungers With Pull Ring In Steel &amp; Stainless Steel Size M8-M20",
            "slug": "k0342-indexing-plungers-with-pull-ring-in-steel-stainless-steel-size-m8-m20",
            "meta_title": "K0342 - Indexing Plungers With Pull Ring In Steel &amp; Stainless Steel Size M8-M20",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "524",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0342 - Indexing Plungers With Pull Ring In Steel &amp; Stainless Steel Size M8-M20",
            "image_url": "https:\/\/images.shopcdn.co.uk\/48\/e2\/48e25d45581dbd2dc43770a77197bf04\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": [
                "k0342-indexing-plungers-in-stainless-steel-hardened-pin-size-m8-m20",
                "k0342-indexing-plungers-in-stainless-steel-pin-not-hardened-size-m8-m20",
                "k0342-indexing-plungers-in-steel-hardened-pin-size-m8-m20"
            ]
        },
        {
            "id": "426",
            "parent_id": "393",
            "name": "K0344 - Indexing Plungers In Steel &amp; Stainless Steel Size M10-M20",
            "slug": "k0344-indexing-plungers-in-steel-stainless-steel-size-m10-m20",
            "meta_title": "K0344 - Indexing Plungers In Steel &amp; Stainless Steel Size M10-M20",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "547",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0344 - Indexing Plungers In Steel &amp; Stainless Steel Size M10-M20",
            "image_url": "https:\/\/images.shopcdn.co.uk\/79\/c9\/79c9fe2fa57080be04ca7a9e454005c8\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": [
                "k0344-indexing-plungers-in-stainless-steel-hardened-pin",
                "k0344-indexing-plungers-in-stainless-steel-pin-not-hardened",
                "k0344-indexing-plungers-in-steel-hardened-pin"
            ]
        },
        {
            "id": "430",
            "parent_id": "393",
            "name": "K0348 - Indexing Plungers With Grip In Steel Size M10-M20",
            "slug": "k0348-indexing-plungers-with-grip-in-steel-size-m10-m20",
            "meta_title": "K0348 - Indexing Plungers With Grip In Steel Size M10-M20",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "528",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0348 - Indexing Plungers With Grip In Steel Size M10-M20",
            "image_url": "https:\/\/images.shopcdn.co.uk\/04\/a1\/04a1b970abd7aad4ecd41a5ffe81dca8\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": [
                "k0348-indexing-plungers-form-a-without-nut-natural-finish",
                "k0348-indexing-plungers-form-d-with-nut-powder-coated",
                "k0348-indexing-plungers-form-b-with-nut-natural-finish",
                "k0348-indexing-plungers-form-c-without-nut-powder-coated"
            ]
        },
        {
            "id": "434",
            "parent_id": "393",
            "name": "K0630 - Indexing Plungers With Extended Pin Size M6-M24",
            "slug": "k0630-indexing-plungers-with-extended-pin-size-m6-m24",
            "meta_title": "K0630 - Indexing Plungers With Extended Pin Size M6-M24",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "&lt;div id=&quot;category-description-short-1&quot;&gt;\r\n&lt;div style=&quot;text-align: left;&quot;&gt;\r\n&lt;p&gt;&lt;strong&gt;Product description:&lt;\/strong&gt;&lt;br \/&gt;\r\nIndexing plungers are used where any change in locking position due to lateral forces should be prevented. A new locking position can only be attained after the pin has been manually disengaged. Forms C or D should be used where the plunger remains disengaged for an extended period and the indexing pin prevented from springing back.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Material:&lt;\/strong&gt;&lt;br \/&gt;\r\nSteel version&lt;br \/&gt;\r\nIndexing pin hardened:&lt;br \/&gt;\r\ngrade 5.8.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nStainless steel version&lt;br \/&gt;\r\nIndexing pin hardened:&lt;br \/&gt;\r\nThreaded sleeve 1.4305.&lt;br \/&gt;\r\nIndexing pin 1.4034.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nIndexing pin not hardened:&lt;br \/&gt;\r\nThreaded sleeve 1.4305.&lt;br \/&gt;\r\nIndexing pin 1.4305.&lt;br \/&gt;\r\nMushroom knob black-grey thermoplastic.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Version:&lt;\/strong&gt;&lt;br \/&gt;\r\nSteel version:&lt;br \/&gt;\r\nThreaded sleeve black oxidised.&lt;br \/&gt;\r\nIndexing pin hardened, ground and black oxidised.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Stainless steel version:&lt;\/strong&gt;&lt;br \/&gt;\r\nThreaded sleeve bright.&lt;br \/&gt;\r\nIndexing pin hardened and ground, bright.&lt;br \/&gt;\r\nIndexing pin not hardened and ground, bright.&lt;br \/&gt;\r\nMushroom grip black grey&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Accessory:&lt;\/strong&gt;&lt;br \/&gt;\r\nSpacer rings K0665.&lt;br \/&gt;\r\nFastening sets for thin-walled parts K2146.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Drawing reference:&lt;\/strong&gt;&lt;br \/&gt;\r\nForm B: non-lockout type, with locknut&lt;br \/&gt;\r\nForm D: lockout type, with locknut&lt;\/p&gt;\r\n&lt;\/div&gt;\r\n\r\n&lt;div class=&quot;category-desc-drawings&quot; style=&quot;display: flex; justify-content: center; flex-wrap: wrap; gap: 20px; margin-top: 20px;&quot;&gt;&lt;img alt=&quot;Indexing Plunger. M6 Thread Size. 1.5mm Thread Pitch. 4mm Pin Diameter. Without Locking Slot. Not Hardened. Stainless Steel.&quot; src=&quot;https:\/\/images.shopcdn.co.uk\/f1\/43\/f1436a0e0f6563d82d6e5ea1899b8acd\/1024x1024\/webp\/fit?quality=100&amp;compression=100&amp;t=1749458725&quot; \/&gt;&lt;\/div&gt;\r\n&lt;\/div&gt;",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "516",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0630 - Indexing Plungers With Extended Pin Size M6-M24",
            "image_url": "https:\/\/images.shopcdn.co.uk\/6b\/94\/6b94857ca721d6bbd9e295fc7a9ae6a3\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": []
        },
        {
            "id": "435",
            "parent_id": "393",
            "name": "K0631 - Indexing Plungers Short Version Steel &amp; Stainless Steel Size M8-M20",
            "slug": "k0631-indexing-plungers-short-version-steel-stainless-steel-size-m8-m20",
            "meta_title": "K0631 - Indexing Plungers Short Version Steel &amp; Stainless Steel Size M8-M20",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "517",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0631 - Indexing Plungers Short Version Steel &amp; Stainless Steel Size M8-M20",
            "image_url": "https:\/\/images.shopcdn.co.uk\/90\/72\/90727b453be29df0eec1f1dc1fc318c6\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": [
                "k0631-indexing-plungers-in-steel-hardened-pin-four-types",
                "k0631-indexing-plungers-in-stainless-steel-steel-pin-not-hardened"
            ]
        },
        {
            "id": "437",
            "parent_id": "393",
            "name": "K0632 - Indexing Plungers In Stainless Steel Size M6-M20",
            "slug": "k0632-indexing-plungers-in-stainless-steel-size-m6-m20",
            "meta_title": "K0632 - Indexing Plungers In Stainless Steel Size M6-M20",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "520",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0632 - Indexing Plungers In Stainless Steel Size M6-M20",
            "image_url": "https:\/\/images.shopcdn.co.uk\/2d\/e3\/2de37032a9f3608f6cfffb6422b75207\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": [
                "k0632-indexing-plungers-stainless-steel-pin-not-hardened",
                "k0632-indexing-plungers-stainless-steel-pin-hardened"
            ]
        },
        {
            "id": "443",
            "parent_id": "393",
            "name": "K0633 - Indexing Plungers Without Collar And Extended Indexing Pin",
            "slug": "k0633-indexing-plungers-without-collar-and-extended-indexing-pin",
            "meta_title": "K0633 - Indexing Plungers Without Collar And Extended Indexing Pin",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "&lt;div id=&quot;category-description-short-1&quot;&gt;\r\n&lt;div style=&quot;text-align: left;&quot;&gt;\r\n&lt;p&gt;&lt;strong&gt;Material:&lt;\/strong&gt;&lt;br \/&gt;\r\n&lt;span style=&quot;font-size: 15px;&quot;&gt;Steel version&lt;\/span&gt;&lt;br \/&gt;\r\nIndexing pin hardened:&lt;br \/&gt;\r\ngrade 5.8.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nStainless steel version&lt;br \/&gt;\r\nIndexing pin hardened:&lt;br \/&gt;\r\nThreaded sleeve 1.4305.&lt;br \/&gt;\r\nIndexing pin 1.4034.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nIndexing pin not hardened:&lt;br \/&gt;\r\nThreaded sleeve 1.4305.&lt;br \/&gt;\r\nIndexing pin 1.4305.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nMushroom knob black-grey thermoplastic.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Version:&lt;\/strong&gt;&lt;br \/&gt;\r\nSteel version:&lt;br \/&gt;\r\nIndexing pin hardened, ground, black oxidised.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nStainless steel version:&lt;br \/&gt;\r\nIndexing pin hardened, ground and bright.&lt;br \/&gt;\r\nIndexing pin not hardened, ground and bright.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Note:&lt;\/strong&gt;&lt;br \/&gt;\r\nIndexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged.&lt;br \/&gt;\r\nA washer is available to aid by screwing in the indexing plungers. The washer slides beneath the mushroom knob so that the carrier pins engage in the slot.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Accessory:&lt;\/strong&gt;&lt;br \/&gt;\r\nSpacer rings K0665.&lt;br \/&gt;\r\nFastening sets for thin-walled parts K2146.&lt;\/p&gt;\r\n&lt;\/div&gt;\r\n\r\n&lt;div class=&quot;category-desc-drawings&quot; style=&quot;display: flex; justify-content: center; flex-wrap: wrap; gap: 20px; margin-top: 20px;&quot;&gt;&lt;img alt=&quot;Indexing Plunger. Thread Size M8. Thread Pitch 1mm. Pin Diameter 4mm. Without Locking Slot. Hardened. Stainless Steel.&quot; src=&quot;https:\/\/images.shopcdn.co.uk\/01\/83\/0183a3e6a359eecdf6d57d762c998ebd\/750x749\/webp\/resize?quality=100&amp;compression=100&quot; \/&gt;&lt;\/div&gt;\r\n&lt;\/div&gt;",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "551",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0633 - Indexing Plungers Without Collar And Extended Indexing Pin",
            "image_url": "https:\/\/images.shopcdn.co.uk\/a0\/22\/a022ade07b928cbfe7c5dc93b906761e\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": []
        },
        {
            "id": "445",
            "parent_id": "393",
            "name": "K0638 - Bracing Parts For Use With Indexing Plungers",
            "slug": "k0638-bracing-parts-for-use-with-indexing-plungers",
            "meta_title": "K0638 - Bracing Parts For Use With Indexing Plungers",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "559",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0638 - Bracing Parts For Use With Indexing Plungers",
            "image_url": "https:\/\/images.shopcdn.co.uk\/28\/c5\/28c5ce2f08b9d3e6a5bb6ad0c95e51d2\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": [
                "k0638-mounting-bracket-in-steel",
                "k0638-mounting-bracket-in-aluminium"
            ]
        },
        {
            "id": "446",
            "parent_id": "393",
            "name": "K0639 - Indexing Plungers With Grip In Steel Size 10-20mm",
            "slug": "k0639-indexing-plungers-with-grip-in-steel-size-10-20mm",
            "meta_title": "K0639 - Indexing Plungers With Grip In Steel Size 10-20mm",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "539",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0639 - Indexing Plungers With Grip In Steel Size 10-20mm",
            "image_url": "https:\/\/images.shopcdn.co.uk\/47\/6c\/476c2cdf7d04de30631155b994a040d7\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": [
                "k0639-indexing-plungers-with-grip-uncoated-form-e-in-steel-size-10-20mm",
                "k0639-indexing-plungers-with-grip-coated-form-f-in-steel-size-10-20mm"
            ]
        },
        {
            "id": "447",
            "parent_id": "393",
            "name": "K0665 - Stainless Steel Spacer Rings For Adjusting Indexing Plungers",
            "slug": "k0665-stainless-steel-spacer-rings-for-adjusting-indexing-plungers",
            "meta_title": "K0665 - Stainless Steel Spacer Rings For Adjusting Indexing Plungers",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "&lt;p&gt;&lt;strong&gt;Material:&lt;\/strong&gt;&lt;br \/&gt;\r\n1.4305 or 1.4404 stainless steel.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Version:&lt;\/strong&gt;&lt;br \/&gt;\r\nBright.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Note:&lt;\/strong&gt;&lt;br \/&gt;\r\nSpacer rings are used to adjust the indexing plunger thread length to suit the application wall thickness.&lt;\/p&gt;\r\n\r\n&lt;div class=&quot;category-desc-drawings&quot; style=&quot;display: flex; justify-content: center; flex-wrap: wrap; gap: 20px; margin-top: 20px;&quot;&gt;&lt;img alt=&quot;Indexing Plunger Spacer.&quot; src=&quot;https:\/\/images.shopcdn.co.uk\/b5\/60\/b5606f4e6ec4a6fa7a94e1a2098525d5\/1024x1024\/webp\/fit?quality=100&amp;compression=100&amp;t=1749555749&quot; \/&gt;&lt;\/div&gt;",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "558",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0665 - Stainless Steel Spacer Rings For Adjusting Indexing Plungers",
            "image_url": "https:\/\/images.shopcdn.co.uk\/fe\/12\/fe12441a7b4ca78cc56371f8cd850143\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": []
        },
        {
            "id": "448",
            "parent_id": "393",
            "name": "K0748 - Indexing Plungers Short Version",
            "slug": "k0748-indexing-plungers-short-version",
            "meta_title": "K0748 - Indexing Plungers Short Version",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "&lt;div id=&quot;category-description-short-1&quot;&gt;\r\n&lt;div style=&quot;text-align: left;&quot;&gt;\r\n&lt;p&gt;&lt;strong&gt;Material:&lt;\/strong&gt;&lt;br \/&gt;\r\n&lt;span style=&quot;font-size: 15px;&quot;&gt;Steel version:&lt;\/span&gt;&lt;br \/&gt;\r\nIndexing pin not hardened.&lt;br \/&gt;\r\nThreaded sleeve steel.&lt;br \/&gt;\r\nIndexing pin 1.4305.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nStainless steel version:&lt;br \/&gt;\r\nIndexing pin not hardened.&lt;br \/&gt;\r\nThreaded sleeve 1.4305.&lt;br \/&gt;\r\nIndexing pin 1.4305.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nMushroom grip black grey thermoplastic.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Version:&lt;\/strong&gt;&lt;br \/&gt;\r\nSteel version:&lt;br \/&gt;\r\nIndexing pin hardened.&lt;br \/&gt;\r\nThreaded sleeve trivalent blue passivated.&lt;br \/&gt;\r\nIndexing pin bright.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nStainless steel version:&lt;br \/&gt;\r\nIndexing pin not hardened.&lt;br \/&gt;\r\nSteel parts bright.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Note:&lt;\/strong&gt;&lt;br \/&gt;\r\nIndexing plungers are used to prevent changes to the locking position due to lateral forces. Another locking position can be set only after the plunger has been manually released. Indexing plungers with regular thread and unpolished and unhardened indexing pins are a cost-effective alternative to existing indexing plungers. But their degree of precision is still sufficient for many applications. The smaller production tolerances also make these products less sensitive to the alignment errors that can occur when aligning indexing plungers with the hole in the counter piece.&lt;br \/&gt;\r\nPay attention to the max. tightening torque when assembling.&lt;\/p&gt;\r\n&lt;\/div&gt;\r\n\r\n&lt;div class=&quot;category-desc-drawings&quot; style=&quot;display: flex; justify-content: center; flex-wrap: wrap; gap: 20px; margin-top: 20px;&quot;&gt;&lt;img alt=&quot;Indexing Plunger. Thread Size M12. Pin Diameter 6mm. Without Locking Slot. Not Hardened. Steel.&quot; src=&quot;https:\/\/images.shopcdn.co.uk\/c2\/47\/c247ef7db247bde89828c558336c85a0\/1024x1024\/webp\/fit?quality=100&amp;compression=100&amp;t=1748871389&quot; \/&gt;&lt;\/div&gt;\r\n&lt;\/div&gt;",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "556",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0748 - Indexing Plungers Short Version",
            "image_url": "https:\/\/images.shopcdn.co.uk\/44\/95\/44956317b6d6fdb3da18a00a3700840f\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": []
        },
        {
            "id": "449",
            "parent_id": "393",
            "name": "K1124 - Indexing Plungers With T Grip",
            "slug": "k1124-indexing-plungers-with-t-grip",
            "meta_title": "K1124 - Indexing Plungers With T Grip",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "&lt;div id=&quot;category-description-short-1&quot;&gt;\r\n&lt;div style=&quot;text-align: left;&quot;&gt;&lt;strong&gt;Material:&lt;\/strong&gt;\r\n&lt;p&gt;Steel version:&lt;br \/&gt;\r\nIndexing pin hardened:&lt;br \/&gt;\r\nIndexing pin steel.&lt;br \/&gt;\r\nThreaded sleeve steel.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nStainless steel version:&lt;br \/&gt;\r\nIndexing pin hardened:&lt;br \/&gt;\r\nThreaded sleeve 1.4305.&lt;br \/&gt;\r\nIndexing pin 1.4034.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nT-grip black grey or traffic red RAL3020 thermoplastic.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Version:&lt;\/strong&gt;&lt;br \/&gt;\r\nSteel version:&lt;br \/&gt;\r\nindexing pin hardened, ground and black oxidised.&lt;br \/&gt;\r\nThreaded sleeve black oxidised&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nStainless steel version:&lt;br \/&gt;\r\nindexing pin hardened, ground and bright.&lt;br \/&gt;\r\nThreaded sleeve bright.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Note:&lt;\/strong&gt;&lt;br \/&gt;\r\nIndexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. The ergonomic T-grip enables easy handling and low effort.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Accessory:&lt;\/strong&gt;&lt;br \/&gt;\r\nSpacer rings K0665.&lt;br \/&gt;\r\nFastening sets for thin-walled parts K2146.&lt;\/p&gt;\r\n&lt;\/div&gt;\r\n\r\n&lt;div class=&quot;category-desc-drawings&quot; style=&quot;display: flex; justify-content: center; flex-wrap: wrap; gap: 20px; margin-top: 20px;&quot;&gt;&lt;img alt=&quot;Indexing Plunger With T Grip. Thread M12. Thread Pitch 1.5mm. Pin Diameter 6mm. Hardened. Steel.&quot; src=&quot;https:\/\/images.shopcdn.co.uk\/98\/84\/9884440c0b5353c31c9c71cc81052679\/750x680\/webp\/resize?quality=100&amp;compression=100&quot; \/&gt;&lt;\/div&gt;\r\n&lt;\/div&gt;",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "542",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K1124 - Indexing Plungers With T Grip",
            "image_url": "https:\/\/images.shopcdn.co.uk\/61\/b2\/61b2d5c05ddef1443416c0b990c07170\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": []
        },
        {
            "id": "450",
            "parent_id": "393",
            "name": "K1284 - Cam-Action Indexing Plungers With Stop",
            "slug": "k1284-cam-action-indexing-plungers-with-stop",
            "meta_title": "K1284 - Cam-Action Indexing Plungers With Stop",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "533",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K1284 - Cam-Action Indexing Plungers With Stop",
            "image_url": "https:\/\/images.shopcdn.co.uk\/0c\/4a\/0c4a39ee000697439d32605af43013d6\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": [
                "k1284-cam-action-indexing-plungers-with-stop-right-hand-open",
                "k1284-cam-action-indexing-plungers-with-stop-left-hand-open"
            ]
        },
        {
            "id": "453",
            "parent_id": "393",
            "name": "K1285 - Cam-Action Indexing Plungers With Stop In Stainless Steel",
            "slug": "k1285-cam-action-indexing-plungers-with-stop-in-stainless-steel",
            "meta_title": "K1285 - Cam-Action Indexing Plungers With Stop In Stainless Steel",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "536",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K1285 - Cam-Action Indexing Plungers With Stop In Stainless Steel",
            "image_url": "https:\/\/images.shopcdn.co.uk\/22\/fb\/22fb7eec83cc08edb2205666153e2bd5\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": [
                "k1285-cam-action-indexing-plungers-with-stop-in-stainless-steel-right-hand-open",
                "k1285-cam-action-indexing-plungers-with-stop-in-stainless-steel-left-hand-open"
            ]
        },
        {
            "id": "454",
            "parent_id": "393",
            "name": "K0634 - Indexing Plungers In Stainless Steel No Collar Size M6-M24",
            "slug": "k0634-indexing-plungers-in-stainless-steel-no-collar-size-m6-m24",
            "meta_title": "K0634 - Indexing Plungers In Stainless Steel No Collar Size M6-M24",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "552",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0634 - Indexing Plungers In Stainless Steel No Collar Size M6-M24",
            "image_url": "https:\/\/images.shopcdn.co.uk\/4f\/dc\/4fdc31cf2cd52b83902f69c360d34fc6\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": [
                "k0634-indexing-plungers-in-stainless-steel-hardened-pin",
                "k0634-indexing-plungers-in-stainless-steel-pin-not-hardened"
            ]
        },
        {
            "id": "455",
            "parent_id": "393",
            "name": "K0344 - Screw In Washers For Indexing Plunger Without Collar",
            "slug": "k0344-screw-in-washers-for-indexing-plunger-without-collar",
            "meta_title": "K0344 - Screw In Washers For  Indexing Plunger Without Collar",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "&lt;p&gt;&lt;strong&gt;Material, version:&lt;\/strong&gt;&lt;br \/&gt;\r\nSteel, black oxidised.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Note:&lt;\/strong&gt;&lt;br \/&gt;\r\nSpecial washer for screwing in the indexing&lt;br \/&gt;\r\nplungers without collar. The washer fits beneath the disengaged mushroom knob so that the carrier pins engage in the slot.&lt;\/p&gt;\r\n\r\n&lt;div class=&quot;category-desc-drawings&quot; style=&quot;display: flex; justify-content: center; flex-wrap: wrap; gap: 20px; margin-top: 20px;&quot;&gt;&amp;nbsp;&lt;\/div&gt;",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "557",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0344 - Screw In Washers For Indexing Plunger Without Collar",
            "image_url": "https:\/\/images.shopcdn.co.uk\/5d\/ee\/5deeeec1dd77cb56eed3443ba4f0e6f5\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "",
            "child_slugs": []
        },
        {
            "id": "459",
            "parent_id": "393",
            "name": "K0747 - Indexing Plungers",
            "slug": "k0747-indexing-plungers",
            "meta_title": "K0747 - Indexing Plungers",
            "meta_description": "",
            "canonical_override": "",
            "long_description": "",
            "short_description": "&lt;div id=&quot;category-description-short-1&quot;&gt;\r\n&lt;div style=&quot;text-align: left;&quot;&gt;\r\n&lt;p&gt;&lt;strong&gt;Product description:&lt;\/strong&gt;&lt;br \/&gt;\r\nIndexing plungers are used where any change in locking position due to lateral forces should be prevented. A new indexed position can be only be moved to after the pin has been manually retracted.&lt;br \/&gt;\r\nLockout versions&amp;nbsp;are recommended for applications where the indexing pin should remain disengaged for an extended period and be prevented from springing back.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nIndexing plungers with regular threads and not ground or hardened indexing pins are a cost-effective alternative to existing indexing plungers. However, the precision offered is still sufficient for many applications. The smaller machining tolerances also make these products less sensitive to the alignment errors that can occur when aligning indexing plungers with the hole in the opposite component.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Material:&lt;\/strong&gt;&lt;br \/&gt;\r\nSteel version:&lt;br \/&gt;\r\nThreaded sleeve 1.0715.&lt;br \/&gt;\r\nIndexing pin 1.4305.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nStainless steel version:&lt;br \/&gt;\r\nThreaded sleeve and indexing pin 1.4305.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nMushroom knob black grey thermoplastic RAL 7021.&lt;\/p&gt;\r\n\r\n&lt;p&gt;&lt;strong&gt;Version:&lt;\/strong&gt;&lt;br \/&gt;\r\nSteel version:&lt;br \/&gt;\r\nIndexing pin hardened.&lt;br \/&gt;\r\nThreaded sleeve trivalent blue passivated.&lt;br \/&gt;\r\nIndexing pin bright.&lt;br \/&gt;\r\n&lt;br \/&gt;\r\nStainless steel version:&lt;br \/&gt;\r\nIndexing pin not hardened.&lt;br \/&gt;\r\nSteel parts bright.Note:Pay attention to the max. tightening torque when assembling.On request:Special versions.&lt;\/p&gt;\r\n&lt;\/div&gt;\r\n\r\n&lt;div class=&quot;category-desc-drawings&quot; style=&quot;display: flex; justify-content: center; flex-wrap: wrap; gap: 20px; margin-top: 20px;&quot;&gt;&lt;img alt=&quot;Indexing Plunger. Thread Size M6. Pin Diameter 4mm. Without Locking Slot. Not Hardened. Steel..&quot; src=&quot;https:\/\/images.shopcdn.co.uk\/24\/c5\/24c5cc95c73b658305ac97d8fb403959\/1024x1024\/webp\/fit?quality=100&amp;compression=100&amp;t=1749556668&quot; \/&gt;&lt;\/div&gt;\r\n&lt;\/div&gt;",
            "active": "1",
            "visible": "1",
            "show_products": "1",
            "order_num": "555",
            "default_sortby": "best_match",
            "deleted": "0",
            "path": "Kipp Standard Parts &gt; Indexing Plungers &gt; K0747 - Indexing Plungers",
            "image_url": "https:\/\/images.shopcdn.co.uk\/bc\/97\/bc97b597ceed2ded40753fd9eeb08678\/512x512\/webp\/resize?quality=100&amp;compression=100",
            "selected": "1",
            "child_slugs": []
        }
    ],
    "child_slugs": [],
    "images": [
        {
            "url": "https:\/\/images.shopcdn.co.uk\/bc\/97\/bc97b597ceed2ded40753fd9eeb08678\/1024x1024\/webp\/resize?quality=100&amp;compression=100",
            "contain_url": "https:\/\/images.shopcdn.co.uk\/bc\/97\/bc97b597ceed2ded40753fd9eeb08678\/256x256\/webp\/resize?quality=100&amp;compression=100",
            "crop_url": "https:\/\/images.shopcdn.co.uk\/bc\/97\/bc97b597ceed2ded40753fd9eeb08678\/256x256\/webp\/resize?quality=100&amp;compression=100",
            "original_url": "https:\/\/images.shopcdn.co.uk\/bc\/97\/bc97b597ceed2ded40753fd9eeb08678\/300x152\/webp\/resize?quality=100&amp;compression=100"
        }
    ],
    "is_parent_category": false,
    "is_product_group": false,
    "parent_category_title": "Indexing Plungers",
    "parent_category_url": "indexing-plungers",
    "path_list": [
        "Kipp Standard Parts",
        "Indexing Plungers",
        "K0747 - Indexing Plungers"
    ],
    "selectedTags": [],
    "availableProducts": {
        "key": "available",
        "doc_count": 20,
        "stockLevel": {
            "untracked": 20,
            "in_stock": 0
        }
    },
    "unavailableProducts": {
        "key": "unavailable",
        "doc_count": 0
    }
}

Category Image Schema