Free Standard Delivery on all orders over £75 ex VAT

delivery countdown placeholder

 
 

Mobile/Tablet

  Free Standard Delivery on all orders over £75 ex VAT

  No minimum order charge

Ex VAT Inc VAT
 

Item Code: K0632.002412

Indexing Plunger. M20 Thread. 1.5mm Thread Pitch. 12mm Pin Diameter. Without Locking Slot. Hardened. Stainless Steel.

Indexing Plunger. M20 Thread. 1.5mm Thread Pitch. 12mm Pin Diameter. Without Locking Slot. Hardened. Stainless Steel.

Item Code: K0632.002412

Indexing Plunger. M20 Thread. 1.5mm Thread Pitch. 12mm Pin Diameter. Without Locking Slot. Hardened. Stainless Steel.

Material:
- Locking pin hardened:
threaded sleeve 1.4305.
Locking pin 1.4034.
- Locking pin not hardened:
threaded sleeve 1.4305.
Locking pin 1.4305. Mushroom knob 1.4305, electrolytic-polish. Surface finish:
Natural finish.
Locking pin ground.
Note:
Locking bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.

Quick Links

Dispatch by 30/07/25

12
M20x1.5
33
2.8
87
28
14
25
with locknut
No
39
15
Hardened
22
12

£55.54  ea. Excl VAT £66.65  ea. Inc VAT

This product is currently out of stock. Your item will be shipped when it is back in stock.

Qty

Product Wishlist & Compare Placeholder

Qty Price per item Savings
5 + £47.21 15%

Free Standard Delivery over £75 ex VAT

Spend another £75 to qualify

 

modal placeholder

Quick Links

 
 
Material:
- Locking pin hardened:
threaded sleeve 1.4305.
Locking pin 1.4034.
- Locking pin not hardened:
threaded sleeve 1.4305.
Locking pin 1.4305. Mushroom knob 1.4305, electrolytic-polish. Surface finish:
Natural finish.
Locking pin ground.
Note:
Locking bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
D12
D1M20x1.5
D233
Fx30°2.8
L87
L128
L214
L325
Locknutwith locknut
LockoutNo
Spring force final pressure F2 approx. N39
Spring force initial pressure F1 approx. N15
Surface finish / bodyHardened
SW122
Travel S12
TypeNon Lockout
Body MaterialStainless Steel
Thread SizeM20
Pin Diameter12mm
Pin Length12mm
 
 

Related products