Free Standard Delivery on all orders over £75 ex VAT

delivery countdown placeholder

 
 

Mobile/Tablet

  Free Standard Delivery on all orders over £75 ex VAT

  No minimum order charge

Ex VAT Inc VAT
 

Item Code: K0338.04410

Indexing Plunger. M20 Thread. 1.5mm Thread Pitch. 10mm Pin Diameter. With Locking Slot. Hardened. Stainless Steel.

Item Code: K0338.04410

Indexing Plunger. M20 Thread. 1.5mm Thread Pitch. 10mm Pin Diameter. With Locking Slot. Hardened. Stainless Steel.

Material:
- Steel version, locking pin hardened:
quality class 5.8.
- Stainless steel version, locking pin hardened:
threaded sleeve 1.4305.
Locking pin 1.4034.
- Stainless steel version, locking pin not hardened:
threaded sleeve 1.4305.
Locking pin 1.4305. Mushroom knob in anthracite grey thermoplastic. Surface finish:
- Steel version, locking pin hardened:
black oxide finish. Locking pin ground.
- Stainless steel version, locking pin hardened:
natural finish. Locking pin ground.
- Stainless steel version, locking pin not hardened:
natural finish. Locking pin ground. Note:
Locking bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.

Quick Links

Dispatch by 03/07/25

Black
10
M20x1.5
33
2.8
74
28
12
25
with locknut
Yes
34
15
Hardened
22
10

£46.10  ea. Excl VAT £55.32  ea. Inc VAT

This product is currently out of stock. Your item will be shipped when it is back in stock.

Qty

Product Wishlist & Compare Placeholder

Qty Price per item Savings
15 + £37.80 18%

Free Standard Delivery over £75 ex VAT

Spend another £75 to qualify

 

modal placeholder

Quick Links

 
 
Material:
- Steel version, locking pin hardened:
quality class 5.8.
- Stainless steel version, locking pin hardened:
threaded sleeve 1.4305.
Locking pin 1.4034.
- Stainless steel version, locking pin not hardened:
threaded sleeve 1.4305.
Locking pin 1.4305. Mushroom knob in anthracite grey thermoplastic. Surface finish:
- Steel version, locking pin hardened:
black oxide finish. Locking pin ground.
- Stainless steel version, locking pin hardened:
natural finish. Locking pin ground.
- Stainless steel version, locking pin not hardened:
natural finish. Locking pin ground. Note:
Locking bolts are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the bolt has been manually disengaged. Form C or D is recommended for applications in which gradual disengagement of the locking bolt is desired, without any relocking of the locking pin.
Component colourBlack
D10
D1M20x1.5
D233
Fx30°2.8
L74
L128
L212
L325
Locknutwith locknut
LockoutYes
Spring force final pressure F2 approx. N34
Spring force initial pressure F1 approx. N15
Surface finish / bodyHardened
SW122
Travel S10
TypeLockout
Body MaterialStainless Steel
Thread SizeM20
Pin Diameter10mm
Pin Length10mm
 
 

Related products